After update to AIRAC 2306 rev.02 the navdata for ILS-Landings is wrong. My Aircraft I use doesn’t align to the used runway.
I installed back to AIRAC 2306 rev. 1. After that it worked just fine. Please check the update from AIRAC 2306 rev. 2 if there is any wrong data in the update ( July 1 2023).
Thank you!
Thanks, but I can’t reproduce it, sorry …
At least not with the ILS approaches which I have tested now.
Cheers
Richard
Guten Tag,
ich habe auch das gleiche Problem. Update AIRAC 2306 rev.02,beim ILS landen Flugzeug landet an die Seiten der Landebahn davor war alles in ordnung ich bitte um hilfe
Danke
mehazak
In english please. Without any specification/details it is not reproduceable.
Cheers
Richard
Confirmed for EGLL rwy 27L/R and EDDM rwy 26R. This is no slight offset, I’d be landing on some taxiway…
Thank you very much for the details, good job - let me check please!
Cheers
Richard
hello sir my problem is Flybywire A320 lvfr A321-319 planes with Rom LIRF RW34R or Budapest LHBP RW 31R Can you try with ILS to solve the problem?
I’m writing from google translator, I hope I could explain
Thank you
Hello, I also use FlybyWire aircrafts. I tryed several Approaches (ILS) on diffrent Airports. No approach worked. The only thing that worked was to use AIRAC 2306 Rev.1. Then the approaches works fine.
There must be a common problem with update to 2306 Rev.2, because it happenes with all airports I used.(EDDH, EGLL)
Gents,
I can confirm an issue with the example approaches. I’m currently checking what happened and why this was happened with this rev. 2 … Of course, I will release a 3rd revision, when it’s fixed. Sorry folks …
Cheers
Richard
Same issue here, and not just ILS. Some RNAV approaches that were previously aligned with the runway also became offset.
Examples I’ve flown into:
KMYR, KMDW, KHOU, KDAL, EDDN, KMSY, KPIT
I used Fenix, PMDG, and FBW. All same issues.
Do we have an ETA on Rev 3? If not, how do I revert back to Rev 1?
Hi folks,
I have fixed the issue now - I´m sorry, it was really an issue on my side with a wrong heading calculation. I´m working currently on an new project for MSFS and I have used a new method to calculate the correct heading, align the center line. This calculation method has used the wrong mag-var table and therefore not on all, but on many airports/runways the alignments were slightly off/wrong.
I apologize. Sorry for the bug and thanks for your reports and your patience. Please try revision 3 now, which I have just released. Any feedback is welcome 
Again, mea culpa - sorry …
Cheers,
Richard
Same issue for me at CYUL and CYYZ… CYUL 06R approach was out of track maybe 50 feets at the left… and 05 at CYYZ not capturing the localiser…
Ok he was on the Rev.2… I will try with Rev.3
Ok work perfect for me… 05 CYYZ… All good!! TY!!
Thx so much for this fast correction!
Thanks for the fast turnaround!
Dear sir,
the system works very well, thank you very much
Mehmet Azak
Germany
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.
