Carenado atr72-500 no dep rwys

Navigation Data General non MSFS data
1

Hi Everyone, I filed a flightplan to fly from TTPP to TLPC but I got no SIDS/RWYS on the DEP Page, the SIDS doesn’t bother me because the airport might not use SIDS in real life but the RWYS have a have been a head scratcher, I also don’t know if I have the correct navigraph path for Carenado since it wasn’t automatically detected by navigraph and I had to add it manually, ani ideas? Thanks

EDTODUFSX

2

Hi…

Welcome.

I don’t know why the Carenado ATR72 doesn’t show TTPP Rwys, but I don’t believe it is a Navigraph data issue. Best to ask in the Carenado forum

Mapping for Carenado in FMS Data Manager is …your P3D v4\CarenadoNavigraph\Navigraph

image
image1777×111 30.7 KB

See also Phenom 300 P3D V4.5

Cheers
Ian

3

TTPP does show Rwys but only on the ARR Page, I was looking at the TTPP.txt file and I believe it only shows Arrival information, not Departures but I could be wrong. I’ll check Carenado forum.

APPTR,I10,10,CURRY
IF,CURRY,10.632222,-61.685833, ,0.0,0.0,0,0,0,0,0,0,0,0
CF,SHARK,10.590556,-61.612500,0,IPOS,284.1,17.3,134.0,5.0,2,4100,0,0,0,0,1,0

FINAL,I10,10,I,3
IF,SHARK,10.590556,-61.612500,IPOS,284.1,17.3,2,4100,0,0,0,0,0,0
CF,TRI,10.595125,-61.422314,0,IPOS,284.8,6.1,105.0,11.2,1,1400,0,0,0,0,2,0
CF,RW10,10.595328,-61.351858,0,IPOS,284.8,1.9,105.0,4.2,1,79,0,0,0,0,3,0
CA,0,105.0,2,2200,0,0,0,0,0,0
DF,POS,10.466389,-61.392361,2, ,0.0,0.0,2,4100,0,0,0,0,0,0
HM,POS,10.466389,-61.392361,1, ,0.0,0.0,292.0,04.3,2,4100,0,0,0,0,0,0,0

APPTR,R10,10,ANELU
IF,ANELU,10.594381,-61.624119, ,0.0,0.0,2,4100,0,0,0,0,1,0
TF,LEXOR,10.594761,-61.522581,0, ,0.0,0.0,0.0,0.0,2,2500,0,0,0,0,1,0

APPTR,R10,10,IMIRA
IF,IMIRA,10.494303,-61.522269, ,0.0,0.0,2,4100,0,0,0,0,1,0
TF,LEXOR,10.594761,-61.522581,0, ,0.0,0.0,0.0,0.0,2,2500,0,0,0,0,1,0

APPTR,R10,10,NAPKO
IF,NAPKO,10.695219,-61.522894, ,0.0,0.0,2,4100,0,0,0,0,1,0
TF,3NM,10.644992,-61.522736,0, ,0.0,0.0,0.0,0.0,2,3300,0,0,0,0,0,0
TF,LEXOR,10.594761,-61.522581,0, ,0.0,0.0,0.0,0.0,2,2500,0,0,0,0,1,0

FINAL,R10,10,G,3
IF,LEXOR,10.594761,-61.522581, ,0.0,0.0,2,2500,0,0,0,0,0,0
TF,TALUS,10.595053,-61.437964,0, ,0.0,0.0,105.0,5.0,1,1700,0,0,0,0,2,0
TF,RW10,10.595328,-61.351858,0, ,0.0,0.0,105.0,5.1,1,80,0,0,0,0,3,1
CA,0,105.0,2,1500,0,0,0,0,0,0
DF,IMIRA,10.494303,-61.522269,2, ,0.0,0.0,2,4100,0,0,0,0,0,0
HM,IMIRA,10.494303,-61.522269,1, ,0.0,0.0,15.0,04.3,2,4100,0,0,0,0,0,0,0

APPTR,R28,28,KIVIP
IF,KIVIP,10.696328,-61.153681, ,0.0,0.0,2,4100,0,0,0,0,1,0
TF,015AT,10.646100,-61.153531,0, ,0.0,0.0,0.0,0.0,2,3300,0,0,0,0,0,0
TF,BOSAT,10.595869,-61.153378,0, ,0.0,0.0,0.0,0.0,2,2500,0,0,0,0,1,0

APPTR,R28,28,MUTAM
IF,MUTAM,10.495411,-61.153075, ,0.0,0.0,2,4100,0,0,0,0,1,0
TF,BOSAT,10.595869,-61.153378,0, ,0.0,0.0,0.0,0.0,2,2500,0,0,0,0,1,0

FINAL,R28,28,G,3
IF,BOSAT,10.595869,-61.153378, ,0.0,0.0,2,2500,0,0,0,0,0,0
TF,DANON,10.595653,-61.237994,0, ,0.0,0.0,285.0,5.0,1,1700,0,0,0,0,2,0
TF,RW28,10.595411,-61.322625,0, ,0.0,0.0,285.0,5.0,1,108,0,0,0,0,3,1
CA,0,285.0,2,1000,0,0,0,0,0,0
DF,MUTAM,10.495411,-61.153075,1, ,0.0,0.0,2,4100,0,0,0,0,0,0
HM,MUTAM,10.495411,-61.153075,2, ,0.0,0.0,15.0,04.3,2,4100,0,0,0,0,0,0,0

4

Hi,
there are no SIDs/STARs available for TTPP - only a “omnidirectional departure SID” without any procedure-identifier. Therefore, no other procedure elements available excluding the approaches.

The runway-information are not in the procedure-file, the information comes from the Airports.txt file - and here we have following lines:

A,TTPP,PIARCO INTL,10.595278,-61.337222,58,4100,5500,10400,0
R,10,105,10495,148,1,109.700,105,10.595328,-61.351858,30,3.00,49,1,0
R,28,285,10495,148,0,0.000,0,10.595411,-61.322625,58,3.00,50,1,0

Cheers,
Richard

5

Understood, Thanks for the clarification, I’ll contact Carenado to see why there are not Rwys available for Departure.

1 Like
6

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.