PGUM/PGSN Missing Approach, SID & STAR

SimBrief Dispatch
1

Hello, long time lurker, first time posting on this forum.

I recently tried to plot a route to PGUM as well as PGSN and noticed that I was not able to select a STAR & Approach to the airport. Similarly, I am unable to select a SID.

As of this writing, I have AIRAC 2507.

I confirm the waypoints for the SID, STAR, and approach waypoints are recognized by X-Plane FMS & Simbrief, it’s just that it isn’t offered when planning a route. Navigraph shows these details exist.

Notice CIBOL & JOMAX waypoints are recognized here after manually adding them, but they are not visible in the STAR/Fix.

image
image1908×871 98.5 KB

Approaches are there but no STAR available. Same with SIDs:

image
image434×542 35.6 KB

image
image347×760 39 KB

Not offered in XPlane either although I can also manually input the waypoints. (screenshot if from the G1000 Evo C90B)

image
image1490×1141 137 KB

Is this a bug or am I missing something?

2

There are no SID or STAR procedures at PGUM?

I haven’t checked but presumably it’s the same situation at the other airport?

Regards,

Tim

3

What about the approach?

4

Right, so, Simbrief never accounts for not depicts final approach procedures. This is, as far as I know, in line with (most?) IRL dispatch systems.

As for the other question, PGSM has an ODP procedure, rather than a SID; those are rarely/never coded in the database (not 100% sure why, but most likely because they are generally just some text instructions without the same requirements as “standardized” IFR procedures like SIDs).

Regards,

Tim

5

So, I revisited the FMC for the Toliss A321 and wasn’t used to personally selecting the VIAS page if there is no STAR. I guess this issue is mostly affecting the G1000.