Navigraph Charts Waypoints not visible

Charts General
1

Hello there

I am struggling to find how to enable all the waypoints in Navigraph Charts.

For example, KDLH has 4 approach transitions for ILS RWY 27. If I select one of these, the DAYAR transition, this approach has a number if waypoints, WIRSA being one of them.

However, WIRSA is only visible in the approach chart and not in the overall ‘main’ map.
Why is this…is this possibly because this waypoint is only used for approach or departure transitions?

Likewise WIRSA is visible in the main nav map of MSFS 2020 but not in the Navigraph main map.

Could someone please clarify these points for me as I am struggling to find the answer.

Many thanks in advance

2

Hi…,

I see the WIRSA waypoint on the DAYR Transition to ILS 27 at KDLH:

image
image1920×1048 154 KB

Maybe you could post a screenshot showing the issue using Guide to posting Screenshots

Cheers
Ian

3

Hi,

Further to Ian’s reply - you can also activate terminal waypoints on the main map (not only with a loaded flight plan), like this:

image
image2508×1712 623 KB

Regards,

Stephen

4

Thank you for both for replying.

I can see what Ian has highlighted but it is the Terminal waypoints that Stephen has shown, that are not displaying no matter what I try enable.

The way point circled in red (WIRSA) and some of the nearby and surrounding waypoints just do not display.

I have followed the steps outlined just in case I missed anything previously, and here is what I always get (as shown in the screenshot below).

image
image1920×1074 150 KB

My navigation pane for my version of Navigraph also displays differently as I don’t have the labels.

Many thanks again

5

Also, what product are you using as I notice your screen shot is displaying Navigation and my screenshot is displaying Flights…have I missed the blatantly obvious here??

6

I am pretty sure you did not enable terminal waypoints. Can you see the red highlighted buttons 2, 3, 4 in my screenshot? You need to press these in that order to enable.

Regards,

Stephen

7

Hi Stephen

I had not selected TW so you are spot on.

In my defense, the sequencing of getting to the Navigation drop down took a bit of understanding.

All icons had to be orange first (I had them in blue so had not understood the sequencing properly)

Only once all icons were orange was I then able to see and select the TW button on the Navigation pane.

That has fixed the issue, thanks for your patience as I figured out the sequencing.

Kind regards

Mark

1 Like
8

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.