Macao VMMC LOC Rwy 16 FMS data incorrect

[norman99]

Hi, flying the PMDG 777 I’ve noticed some FMS data errors with the RWY 16 LOC approaches at Macao VMMC.

When the LOC Z 16 is selected, it incorrectly loads the actual data of the LOC Y 16, tracking via the ZUH/11 fix, and the missed approach via MCU, rather than the RNAV waypoints MC512, MC511 etc…

Similar errors occur when loading the LOC Y 16 and the LOC X 16. Selecting the LOC Y 16 incorrectly loads the actual data of the LOC X 16, which is used when the MCU VOR is U/S

Lastly, selecting the LOC X 16 incorrectly loads the actual data of the LOC Z 16, tracking via RNAV waypoints MC512, MC511 etc… rather than via the ZUH/11 fix.

I’ve not checked other approaches/runways at Macao to see if it’s isolated to just the RWY 16 LOC.

I’ve hope this is understandable. I’m happy to explain in further detail if required.

Cheers,
Michael

[NAVDataOld]

Hi Michael,
Please report this to PMDG. I have checked the database behind all three approaches, and they have the correct waypoint sequence in our database (based cycle 2502):

Here are the sequences for LOC 16-X:

… here are the waypoint sequences for LOC 16-Y:

… and here are the sequences for LOC 16-Z:

So, the data in the database looks correct so far. I can´t identify any data issue here.

Thank you very much,
Richard