ZHHH ILS-Z 05L G/S Inaccurate

[morgan757]

While coming into land at SamScene3D ZHHH (Wuhan) airport in FS2024 with the ILS-Z RWY05L, I noticed that the ILS Glideslope is way off what it should be. 4 whites all the way down, and visibly around 1,000ft above what it should be. I will test without Navigraph installed via the hub to narrow down the issue.

Edit: On 2nd approach, I noticed that the VNAV profile was 500ft below what the G/S Diamond was giving me, so I assume the ILS has been set up either by Navigraph or SamScene3D incorrectly.

[NAVData]

Hi,
Here is a similar report to this issue, with the answer to it:

ZHHH and ZUCK ILS issue

I’m getting too low terrain calls on ILS 04R ZHHH (my main landing gear almost hit the approach lights on ILS) and miss the localizer on ILS 03 ZUCK by almost 100ft to the right. I am using the SamScene3D airport for both so I’m not sure if it’s a scenery problem. So far I’ve got no luck figuring out what’s causing it.

Summary:
It is a scenery issue, rather than a navdata issue.

Cheers
Richard

[morgan757]

Hi Richard,

Thanks for getting back to me. I had a feeling this was the case, but wanted to confirm!

Morgan