My navigraph account has a username /alias and in simbrief account settings my username is N/A. should they not be the same and therefore I am having issues exporting my simbrief flight plan into the aircraft EFB and also receiving the chart information in the SP50 Vision Jet? How do I go about resolving this issue
Your help would be greatly appreciated. Regards Karl[date=2025-05-11 timezone=“Africa/Johannesburg”]
5 posts were split to a new topic: Navigraph and SimBrief Usernames
Hi Karl,
Following from your posts in the account section, it seems you wish to import a SimBrief Flight plan into the Vision Jet MFD
Let’s do things one step at a time.
-
In Navigraph Hub, ensure you have installed:
Avionics Plugin G3000/5000 v 2.04 and
Navigraph EFB Charts App v 1.0.3
-
Confirm you intend running MSFS 2024. Start MSFS 2024
-
Confirm you are using and select the MS/ASOBO Cirrus Vision Jet G2:
-
Press Tab to bring up the EFB, In More Apps (9dots)
-
You should be able to select SimBrief Dispatch:
-
Selecting this you get:
-
Ensure you are logged into your Navigraph subscribed account.
-
Now create or edit a flight plan with the correct aircraft.
-
Make sure you Generate plan
-
Then Import route:
-
World Map should show Departure/Origin airports.
-
In the G3000, select MFD on center display, and SimBrief
-
From Flight Plan list select required flight plan,
-
and import
-
You should have your flight plan imported:
If any of this doesn’t work, please refer to the step number(s).
Cheers
Ian
Hi Ian,
Thanks for the very detailed outline I’m good to go and very thankful that I get all the way to and including Step 13. From step 14 I do not get the simbrief icon on the MFD in the G3000.
Regards
Karl
Hey Ian,
Thank you very much for this detailed explanation I have managed to get all the way including step no 13.This is where I do not have the sim.brief icon in the MFD of the Vision Jet. This has been a huge step in the right direction and I’m extremely thankful. I await your reply with anticipation.
Kind Regards
Karl de Bruyn
082 783 7733
kailin@vodamail.co.za
Hi Karl,
Please advise:
Are you running MSFS 2024?
Are you are using the MS/ASOBO Cirrus Vision Jet G2:
Close MSFS 2024.
In Navigraph Hub, In MSFS 2024 tab, For Avionics Plugin G3000/G5000 v 2.0.4, Press Remove, then Install
Restart MSFS 2024.
You should be able to see the SimBrief option in the Vision Jet MFD. If not please post a screenshot of the MFD using Guide to posting Screenshots
Cheers
Ian
HI Ian,
Yes, I am running MSFS 2024
I sent photo`s as my e-mail as is on another computer.
I trust these will help solve the issue. As you can see the charts in the MFD is also not highlighted.
Await your response
Kind Regards
Karl de Bruyn
082 783 7733
kailin@vodamail.co.za
Hello!
Thank you for the screenshots. Please also note this instruction by my colleague, which is critical for any of this to work correctly:
Have you already done this?
Kind Regards,
Malte
Hi yes these have also be done yet no success
Kind Regards
Karl de Bruyn
082 783 7733
kailin@vodamail.co.za
Can you send a screenshot of your Navigraph Hub, showing that the packages are installed?
Please see attached and after installing from Navigraph Hub
Regards
Karl de Bruyn
082 783 7733
kailin@vodamail.co.za
Besides the fact that your AIRAC is out of date, that looks correct.
Would you be open to me connecting to your computer directly to take a look?
Sure no problem!
Karl de Bruyn
082 783 7733
kailin@vodamail.co.za
After a remote session, we concluded that the packages in question had been disabled from the library section in the MSFS marketplace. This meant that neither the navigation data nor the plugins were loading, resulting in the situation in the screenshots!
Please let us know if you have any further issues. For now, this topic is considered solved!
Kind Regards,
Malte