Hello,
this Issue is discussed several Times, but for me, there is no Solution found until now.
I am using the latest Charts 8 Version of the Windows Desktop App.
Please have a Look into this Picture.
For an Example, this is the FAWU3C APPR to RWY 07L at EDDF.
But it happens on all Approaches on every Airport.
There are no Fixes Visible. Did i set something wrong? Could you please explain, what i have to do, to get the Fixes back again?
Thanks a Lot in Avance.
Joachim
Hi Joachim,
you haven´t set any approach, which fixes do you miss then?
Without set an approach:
when you set an approach (in this case the ILS Y 07L
Cheers,
Richard
Hello Richard,
thanks for your fast Response.
On your second Picture these were the Waypoints i have missed.
There was a lack of knowledge on my Side. Didn’t know, that i have to select the Approach separately. In former Versions of the Charts App, the Waypoints were set automatically by the RWY and APPR in the imported SimBrief FlightPlan.
Greets,
Joachim
No probs Joachim … just to clarify … approach is not equal approach. An ILS approach has “other” waypoints, limits, … as ie. a VOR, NDB, RNP or LOC only approach. Therefore you must select the correct approach - when not, the line goes directly to the airport reference point (means to the airport itself without using a runway).
Hope that helps,
Richard
Hi Richard,
nearly 99% of my flown Approaches are ILS Approaches.
i am no Pilot in Real Life but A.F.A.I.K the IAF and the FF are on all Runways the same independent from the Approach Type.
Anyway. My Problem is solved and i say Thank you.
Greets,
Joachim
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.
