Op System: Win 11
FS Version: P3D V5.4
Add-on: Majestic Q400 Training edition
AIRAC Update No: 2507 rev 1
At the RNP Rwy 25 approach via ERPER the altitude of runway 25 to reach is shown as 2600 ft in the procedure. In fact the altitude should be 10 ft. Therefore the approach is not working and you end at 2600 ft above the runway.
Best regards
Reinhard
Hi Reinhard,
The missed approach point is 2600 feet from ML631. The previous ML631 waypoint had an altitude of 59 feet (50 + 9), so the runway is on 9 feet. I have compared the coding with the AIP Norway, and it´s completely the same:
I don´t know why the FMC didn´t show you the ML631 before, because this segment is included in the database. Sorry, but I can´t see any issue on our side. It’s possible an interpretation error from Majestic´s.
Cheers,
Richard
Richard,
Thanks for checking. I will check with Majestic.
BR
Reinhard
Btw: It’s great, how Navigraph has evolved. Perfect products and service!
Danke dir, Reinhard - thank you very much for these kind words.
Ein schönes Wochenende,
Richard
PS: whenever you have a question or whenever you need further assistance, please don´t hesitate to contact us again 
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.
