# Wrong elevation ETHR/ETSR **URL:** \ **Category:** Airport Scenery\ **Created:** [May 26, 2024, 12:13pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817 "2024-05-26T12:13:41Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Zithuebo](https://avatars.discourse-cdn.com/v4/letter/z/e36b37/32.png) [@Zithuebo](https://forum.navigraph.com/u/Zithuebo)\ **Post date:** [May 26, 2024, 12:13pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/1 "2024-05-26T12:13:41Z")
The runway at Roth army airport has a wrong elevation and is buried in a deep hole. When I remove navigraph-navdata/navigraph-navdata-base from the Community folder all is fine. The issue shows up since the last few AIRACs, also in cycle 2405r1 installed with latest Navigraph hub v1.2.8. The elevation should be 1271ft. Thx! ![ETSR-01b](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/2/b/2bfc1c2f55e55ac735857fae08b0db5ca057abf4.jpeg) ---
**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\ **Post date:** [May 26, 2024, 7:26pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/2 "2024-05-26T19:26:28Z")
Hi, thanks for the report. We don’t have ETHR in our database. For ETSR, which is including in our data, we have indeed no airport elevation. I will check, if I find a solution for this issue in one of the next cycles. Thanks again, Richard ---
**Author:** ![system](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/1X/4cc83e90d70ab312b1bd2d7527bddad309607265.png) [@system](https://forum.navigraph.com/u/system)\ **Post date:** [June 2, 2024, 7:26pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/3 "2024-06-02T19:26:59Z")
This topic was automatically closed 7 days after the last reply. New replies are no longer allowed. ---
**Author:** ![Zithuebo](https://avatars.discourse-cdn.com/v4/letter/z/e36b37/32.png) [@Zithuebo](https://forum.navigraph.com/u/Zithuebo)\ **Post date:** [October 23, 2024, 7:46pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/4 "2024-10-23T19:46:32Z")
Hi, I’m just curious if there is any progress in this topic. Seems the issue with the wrong elevation still exists since my post in May 2024 ([Wrong elevation ETHR/ETSR](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817)). I’m currently on AIRAC 2410 rev4. Greets ---
**Author:** ![Ian](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/ian/32/154_2.png) [@Ian](https://forum.navigraph.com/u/Ian)\ **Post date:** [October 23, 2024, 9:09pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/5 "2024-10-23T21:09:26Z")
---
**Author:** ![Zithuebo](https://avatars.discourse-cdn.com/v4/letter/z/e36b37/32.png) [@Zithuebo](https://forum.navigraph.com/u/Zithuebo)\ **Post date:** [November 1, 2024, 4:41pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/6 "2024-11-01T16:41:19Z")
Short update: elevation still wrong in AIRAC 2411r1. ---
**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\ **Post date:** [November 2, 2024, 6:18am UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/7 "2024-11-02T06:18:32Z")
Hi, As I wrote, we don´t have an elevation for ETSR, so we must set it to zero. There is no other solution for that, sorry. Cheers, Richard ---
**Author:** ![Zithuebo](https://avatars.discourse-cdn.com/v4/letter/z/e36b37/32.png) [@Zithuebo](https://forum.navigraph.com/u/Zithuebo)\ **Post date:** [November 2, 2024, 3:29pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/8 "2024-11-02T15:29:21Z")
Hi, according to the wiki page [Roth Air Base - Wikipedia](https://en.wikipedia.org/wiki/Roth_Air_Base), the elevation is 1271ft. Would that help? Maybe the problems have to do with the old ICAO code ETHR which was replaced by ETSR. Additionally “ET” is normally the ICAO prefix for military airports, but that use was abandoned 2014. Nevertheless the field is still used for civil aviation. Greets ---
**Author:** ![Liss3319](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/liss3319/32/9560_2.png) [@Liss3319](https://forum.navigraph.com/u/Liss3319)\ **Post date:** [February 8, 2025, 2:19pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/9 "2025-02-08T14:19:48Z")
I’m experiencing the same issue with this field. ETHR (also known as ETSR) is listed at 0 ft elevation, making landing impossible. It would be great if we could find a solution to this problem. ---
**Author:** ![system](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/1X/4cc83e90d70ab312b1bd2d7527bddad309607265.png) [@system](https://forum.navigraph.com/u/system)\ **Post date:** [February 10, 2025, 2:20pm UTC](https://forum.navigraph.com/t/wrong-elevation-ethr-etsr/15817/10 "2025-02-10T14:20:18Z")
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.