# Too high approach

**URL:** <https://forum.navigraph.com/t/too-high-approach/6759>\
**Category:** ILS\
**Created:** [December 2, 2021, 9:22am UTC](https://forum.navigraph.com/t/too-high-approach/6759 "2021-12-02T09:22:19Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 9:22am UTC](https://forum.navigraph.com/t/too-high-approach/6759/1 "2021-12-02T09:22:19Z")

</div>

Hello,  
as in other topics written a lot of ILS are not perfect and i cant reply to these topics because they’re closed.

I flying with autopilot and below around 500ft until touchdown my airplane is too high…  
Papis are showing me too high and also my actual landing is very late.  
Happened almost every airport i flew in in last days/weeks and happens with standard included and third parties airports.

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [December 2, 2021, 9:34am UTC](https://forum.navigraph.com/t/too-high-approach/6759/2 "2021-12-02T09:34:58Z")

</div>

Hi,  
I have just flown an approach into KDEN 35L because there was an equal topic here and as you see, this approach is perfect (Reference [link](https://forum.navigraph.com/t/flight-beam-kden-35l-ils-far-too-high/6755/2)). So, you see, we need any reference for testing … also which aircraft you use and if you use any 3rd party addon scenery for this approach or not.

As a general answer to your more or less general topic - I can´t reproduce it sorry.

Cheers,  
Richard

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 9:36am UTC](https://forum.navigraph.com/t/too-high-approach/6759/3 "2021-12-02T09:36:44Z")

</div>

thats sad.  
flew to Aerosoft EDLP ILS 24.  
JustSim EDDL ILS 23L  
Stock EGLL ILS25R  
everytime inside of CJ4 with WorkingTitle Mod for this aircraft  
will cehck other airports and further Standard and extra scenerie

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [December 2, 2021, 9:38am UTC](https://forum.navigraph.com/t/too-high-approach/6759/4 "2021-12-02T09:38:03Z")

</div>

Thanks and have you tried it without the 3rd party sceneries also? … or was the EGLL approach with the stock scenery? Then I can try it too 😉

Cheers,  
Richard

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 9:38am UTC](https://forum.navigraph.com/t/too-high-approach/6759/5 "2021-12-02T09:38:47Z")

</div>

stock and i have the Premium Deluxe Version of sim.  
will check it out if its only with third parties or also with stock

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [December 2, 2021, 9:39am UTC](https://forum.navigraph.com/t/too-high-approach/6759/6 "2021-12-02T09:39:40Z")

</div>

Alles klar, danke 😉

Let me check the EGLL approach … will come back 😉

Sevus,  
Richard

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 9:41am UTC](https://forum.navigraph.com/t/too-high-approach/6759/7 "2021-12-02T09:41:14Z")

</div>

i fly always with live weather and time

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [December 2, 2021, 10:22am UTC](https://forum.navigraph.com/t/too-high-approach/6759/8 "2021-12-02T10:22:48Z")

</div>

Hi again,  
I have tried the EGLL 27R approach and here again, perfect I guess …

Here a screenshot (pressed a little bit to late on the `pause`), so it´s a few feet behind the real threshold but you see, I´m approx. 140ft (again you see approx. 130ft because I´m a few feet behind the threshold as you see) and that´s exactly the correct position (runway elevation at threshold = 78 ft + threshold crossing height 58 ft = 136 ft)

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/7/7087d892bbee565151d3c4e3505a28c2529106ad.jpeg)

I have done this with the A320 (I´m honest, I´m more family with this aircraft, but that should be independent of the type of aircraft) and the stock EGLL.

Cheers,  
Richard

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 10:36am UTC](https://forum.navigraph.com/t/too-high-approach/6759/9 "2021-12-02T10:36:30Z")

</div>

with AP on? Live Weather?

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [December 2, 2021, 10:43am UTC](https://forum.navigraph.com/t/too-high-approach/6759/10 "2021-12-02T10:43:06Z")

</div>

Yes AP on, no live weather - not sure, if 27R is possible at the moment but I´m nearly 100% sure, that this will also work as expected with live-weather. The data are still on the same place, on the same elevation … when this doesn´t work with live-weather, I would have no clue why 🙂

Cheers,  
Richard

PS: but I will try it now … possible that 27 is not possible but I will see

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [December 2, 2021, 11:06am UTC](https://forum.navigraph.com/t/too-high-approach/6759/11 "2021-12-02T11:06:38Z")

</div>

… and here the 27L approach with real-weather (25kts x-wind), now (as you see, sorry for at) a little bit too early on `pause` but acceptable, I guess:

I´m on 149 feet and the target height should be 133 feet (rwy 77 + tch 56):

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/0/0f315df9aab23956a8f89683b29cc7789a0529cc.jpeg)

I also had looked onto the PAPIs now and the colors are also nearly perfect till the touchdown-zone. So, I can´t see any issue here, sorry …

Cheers,  
Richard

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 12:45pm UTC](https://forum.navigraph.com/t/too-high-approach/6759/12 "2021-12-02T12:45:23Z")

</div>

just landed at stock EDDW ILS 27 Y VERED and was too high and had an offset!  
You need Flight Recorder from Flightsim.to

> **[ILS27YEDDW.fltrec](https://www.dropbox.com/s/k82746d2r6i8phm/ILS27YEDDW.fltrec?dl=0)**
>
> Shared with Dropbox

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [December 2, 2021, 12:54pm UTC](https://forum.navigraph.com/t/too-high-approach/6759/13 "2021-12-02T12:54:24Z")

</div>

Hm, very strange - I have tested EDDW now too - the same result as before.

Do you have the new “Navigraph Navdata Center v1.0.2” in place and have you installed the latest AIRAC cycle? Sorry for this simple question 🙂

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/8/8f01f1843d2adf0ca0adeb94d8ef02ba23624811.png)

Cheers,  
Richard

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 2:44pm UTC](https://forum.navigraph.com/t/too-high-approach/6759/14 "2021-12-02T14:44:08Z")

</div>

yes, i updated everything with Navigraph before this flight and i should have the newest settings  
Every flight this happens i think…  
First its perfect aligned and on Glideslope (PAPI 2 Red 2 White) and before touchdown the aircraft is too high and PAPI showing 4 White  
You can see this in my recorded flight (linked in my post above yours)

 ![grafik](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/3/3e4cde00c4505d00cb2aa25ac4aa0d52d9f06b11.png)

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [December 2, 2021, 3:03pm UTC](https://forum.navigraph.com/t/too-high-approach/6759/15 "2021-12-02T15:03:19Z")

</div>

… and when you fly this approach without our data, only with the stock data, all is good? Have you tried it with another aircraft also or only with the CJ4 (it guess it´s the WT mod CJ4, latest stable version)?

I have tried it again but I can´t reproduce it - therefore I´m not sure, where the issue should be …  
I will try this approach with the CJ4 too …

Cheers,  
Richard

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 3:06pm UTC](https://forum.navigraph.com/t/too-high-approach/6759/16 "2021-12-02T15:06:03Z")

</div>

i never used sim without navigraph data  
flew a time the TBM930 and had as i remember also this problems

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 5:31pm UTC](https://forum.navigraph.com/t/too-high-approach/6759/17 "2021-12-02T17:31:03Z")

</div>

> **[EDDWILS27MSFS.fltrec](https://www.dropbox.com/s/vae97ml7ehp576l/EDDWILS27MSFS.fltrec?dl=0)**
>
> Shared with Dropbox

this approach was now without navigraph data!  
No offset and height is good(RWY 14’ + TSH50 = 64’ ) !

 ![20211202184830_1](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/0/02413dce28ccf68809cb86ebe72eea89aacaad4c.jpeg)

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 2, 2021, 6:20pm UTC](https://forum.navigraph.com/t/too-high-approach/6759/18 "2021-12-02T18:20:24Z")

</div>

Now with installed Navigraph Data

 ![20211202191503_1](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/7/76961263df204c4d7277aa7022e314cab2930daf.jpeg)  
 ![20211202191614_1](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/e/e6c4fe039d2dd896929ed00576a0f344a1117b6f.jpeg)  
 ![20211202191653_1](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/4/4141092e6102349b87d7a7c11c75ec1a9a239445.jpeg)

> **[EDDWILSNG.fltrec](https://www.dropbox.com/s/gvyobdaapsp38cm/EDDWILSNG.fltrec?dl=0)**
>
> Shared with Dropbox

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [December 2, 2021, 6:22pm UTC](https://forum.navigraph.com/t/too-high-approach/6759/19 "2021-12-02T18:22:44Z")

</div>

Thanks - very strange. We have received no other reports about this and I don´t know what is the reason for that on your system because it´s working on my system and I assume on most of the systems in the world (because when not, we would receive much, much, much more reports like that).

Very strange … can you upload the content.xml file please, that I can try it with your file?! There must be any difference, I can´t believe it´s in the data.

Cheers,  
Richard

---

<div class="post-metadata">

**Author:** ![derstein98](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@derstein98](https://forum.navigraph.com/u/derstein98)\
**Post date:** [December 6, 2021, 12:02pm UTC](https://forum.navigraph.com/t/too-high-approach/6759/20 "2021-12-06T12:02:47Z")

</div>

[Content.xml](https://forum.navigraph.com/uploads/short-url/eqjnNwd08BiYddpmeZerFZa8eBj.xml) (7.2 KB)

[Next page](https://forum.navigraph.com/t/too-high-approach/6759.md?page=2)
