# SID at SCEL Missing in AIRAC2604 rev.1 **URL:** \ **Category:** General MSFS Data\ **Created:** [April 17, 2026, 7:00pm UTC](https://forum.navigraph.com/t/sid-at-scel-missing-in-airac2604-rev-1/23239 "2026-04-17T19:00:51Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![astutzin](https://avatars.discourse-cdn.com/v4/letter/a/bc8723/32.png) [@astutzin](https://forum.navigraph.com/u/astutzin)\ **Post date:** [April 17, 2026, 7:00pm UTC](https://forum.navigraph.com/t/sid-at-scel-missing-in-airac2604-rev-1/23239/1 "2026-04-17T19:00:51Z")
Dear Navigraph, after updating to AIRAC 2604 rev. 1, Navigraph charts do show SID DONTi1R and 1L properly, although Simbrief (updated also to 2604 rev.1 ) does not have them available (SID/FIX not found). Also, they are also missing form updated data 2604 rev.1 via Navigraph hub for Fenix addon and neither in Inibuilds A350 via OIS download. ---
**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\ **Post date:** [April 17, 2026, 7:52pm UTC](https://forum.navigraph.com/t/sid-at-scel-missing-in-airac2604-rev-1/23239/2 "2026-04-17T19:52:39Z")
Hi, Welcome to Navigraph, and thanks for your report. These RNP procedures can´t be coded with the ARINC424 version currently used and are therefore missing. We have started the evaluation to switch to a newer source version, which includes these procedures (I just checked), but there is no timeline for when we will switch because many systems depend on them, and we must check them before we switch. So, please be patient - you can expect such procedures in the future, after switching the ARINC424 version. For now, use either another procedure or fly it manually … BTW, these procedures are not included in SimBrief because we use one source for all our applications. ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/3/8/389b7042092b929dd2f5b3ffa2a6520f912e89b6.png) Cheers, Richard ---
**Author:** ![astutzin](https://avatars.discourse-cdn.com/v4/letter/a/bc8723/32.png) [@astutzin](https://forum.navigraph.com/u/astutzin)\ **Post date:** [April 17, 2026, 8:08pm UTC](https://forum.navigraph.com/t/sid-at-scel-missing-in-airac2604-rev-1/23239/3 "2026-04-17T20:08:48Z")
Thanks Richard for your kind and prompt answer. Of course I will be patient, it just came to my attention that being on the charts these procs were unavaible. Explanation clear and hope you’ll successfully switch to a newer ARINC version. Regards Andres Stutzin ---
**Author:** ![astutzin](https://avatars.discourse-cdn.com/v4/letter/a/bc8723/32.png) [@astutzin](https://forum.navigraph.com/u/astutzin)\ **Post date:** [April 17, 2026, 8:17pm UTC](https://forum.navigraph.com/t/sid-at-scel-missing-in-airac2604-rev-1/23239/4 "2026-04-17T20:17:58Z")
Sorry to get back to you. I just checked AIRAC 2603 and procs DONTI1L and 1R are available. I thought this info may be helpful. Andres Stutzin ---
**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\ **Post date:** [April 17, 2026, 9:30pm UTC](https://forum.navigraph.com/t/sid-at-scel-missing-in-airac2604-rev-1/23239/5 "2026-04-17T21:30:41Z")
Hi, Thanks - here is the official answer to this: > **[SCEL\_NavData-Alert\_2604.pdf](https://ww2.jeppesen.com/wp-content/uploads/2026/04/SCEL_NavData-Alert_2604.pdf)** > > 148.15 KB … but that doesn´t mean, we close down our task to switch to a newer version 🙂 Cheers, Richard ---
**Author:** ![system](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/1X/4cc83e90d70ab312b1bd2d7527bddad309607265.png) [@system](https://forum.navigraph.com/u/system)\ **Post date:** [April 19, 2026, 9:31pm UTC](https://forum.navigraph.com/t/sid-at-scel-missing-in-airac2604-rev-1/23239/6 "2026-04-19T21:31:27Z")
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.