# No RNP in FS2024

**URL:** <https://forum.navigraph.com/t/no-rnp-in-fs2024/19042>\
**Category:** General MSFS Data\
**Created:** [March 18, 2025, 10:18am UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042 "2025-03-18T10:18:32Z")\
**Posts on this page:** 19\
**Page:** 1

<div class="post-metadata">

**Author:** ![falcon71](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@falcon71](https://forum.navigraph.com/u/falcon71)\
**Post date:** [March 18, 2025, 10:18am UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/1 "2025-03-18T10:18:33Z")

</div>

Hello,  
There is a new RNP field in the nav data for MSFS 2024. I’m using it to filter out any procedures that my GPS unit does not support and it looks quite plausible with the default navigation data. However, when using Navigraph, all RNP values are 0. For example, this is [EDDF](https://navigraph.com/airport/EDDF/Frankfurt-Main) RNAV 7C X, which goes down to 0.3NM in the default data but is all 0 for Navigraph:

 ![navigraph_eddf](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/2/2/22380efdca604b7249825f8129330004abd02a80.jpeg)  
Is this an oversight or is this data not available for Navigraph?

---

<div class="post-metadata">

**Author:** ![skysail](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/skysail/32/304_2.png) [@skysail](https://forum.navigraph.com/u/skysail)\
**Post date:** [March 18, 2025, 1:19pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/2 "2025-03-18T13:19:42Z")

</div>

Hello! Thank you for the feedback!

These values have been correctly included in the next cycle. Let us know if you are still having issues after the next update!

Kind Regards,  
Malte

---

<div class="post-metadata">

**Author:** ![falcon71](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@falcon71](https://forum.navigraph.com/u/falcon71)\
**Post date:** [March 18, 2025, 2:32pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/3 "2025-03-18T14:32:24Z")

</div>

Thank you very much, great news! I won’t even have to wait for long 😁

---

<div class="post-metadata">

**Author:** ![falcon71](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@falcon71](https://forum.navigraph.com/u/falcon71)\
**Post date:** [March 20, 2025, 12:07pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/4 "2025-03-20T12:07:17Z")

</div>

Thanks Malte,  
I see the RNP for approaches now, but it does not look like they are available for SIDs and STARs. For example KJFK PARCH 3. The charts state, that this requires RNAV 1, but in the sim, RNP is 0 for the whole procedure. The same goes for KJFK DEEZZ 5.

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [March 20, 2025, 12:13pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/5 "2025-03-20T12:13:34Z")

</div>

Hi,  
Thank you very much for the report. I will check it … Thanks for the example!

Cheers  
Richard

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [March 20, 2025, 4:50pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/6 "2025-03-20T16:50:06Z")

</div>

Hi again,  
I have checked the RNP values in the SIDs/STARs, and the values are there (i.e., DFFD the ANIX1N departure). My main question is, where do you see the RNP1 in the KJFK SIDs/STARs? I can´t find it on the charts:

… the sample DFFD:

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/2/1/21ecaa2ed4a688be1def4318ce590defdf5f959c.jpeg)

But I don´t see this somewhere on the charts for KJFK, and I have not found any RNPs in the source for SIDs/STARs at KJFK.

So, please, can you provide a hint at where you see this RNP you mentioned in your initial posting?

Thank you very much,  
Richard

PS: RNAV 1 \<\> RNP 1 … RNP is a subset of RNAV with additional requirements

---

<div class="post-metadata">

**Author:** ![falcon71](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@falcon71](https://forum.navigraph.com/u/falcon71)\
**Post date:** [March 20, 2025, 7:43pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/7 "2025-03-20T19:43:27Z")

</div>

Interesting. I do not see an RNP in your example DFFD ANIX1N:

 ![dffd](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/b/b/bb49064aec6a64de88b1069d00b26a455e244e9c.jpeg)  
This is with the JS API and the Avionics Framework.

I guess KJFK was a bad example. I must have remembered it wrong, because it is coded with 0 everywhere even in the default dataset. A better example is [EDDF](https://navigraph.com/airport/EDDF/Frankfurt-Main). There are RNP STARs and RNAV STARs. Both are coded with an RNP of 1 in the default dataset and 0 in the Navigraph dataset.  
I had a quick chat with Working Title on how the RNP value from the dataset should be interpreted:

 ![WT](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/a/d/ad1d23193ca3006106cd6c04cc478ecdf532ef39.jpeg)  
So I guess the value is not expected to follow the strict interpretation of RNP only.

My motivation here is that I simulate a KLN-90B which is only certified for B-RNAV. Its database does not include any procedures that it would not be allowed to fly, so I’m using the RNP field to filter out those procedures.

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [March 20, 2025, 7:54pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/8 "2025-03-20T19:54:37Z")

</div>

I will check it in the next few days and inform you when it´s fixed. When needed, I will release a new revision of this cycle.

Thank you,  
Richard

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [March 24, 2025, 1:34pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/9 "2025-03-24T13:34:40Z")

</div>

Hi again,  
I can confirm that we have identified an issue with the data conversion of the RNP value. We have started to work on a fix. We will release a 2nd revision for this cycle as soon as this is done. Thank you very much for your input … I will keep you informed here when it´s released/online …

I hope that helps,  
Richard

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [March 24, 2025, 6:55pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/10 "2025-03-24T18:55:24Z")

</div>

Hi,  
I have released a second revision for MSFS2024, which correct the RNP values … Please can you confirm, that this is solved now 😉

Thank you very much,  
Richard

---

<div class="post-metadata">

**Author:** ![falcon71](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@falcon71](https://forum.navigraph.com/u/falcon71)\
**Post date:** [March 25, 2025, 5:53am UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/11 "2025-03-25T05:53:19Z")

</div>

The RNP values now look very much as expected. Thank you very much!

I have now noticed that many procedures are twice in the data. For example this is KDAL, where I do not have any custom scenery:

 ![kdal](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/1/7/1767d48790d9325dde252920c2339b0d81832940.jpeg)  
You can see, first are the procedures where the main part are coded as runway transitions and second are the same procedures again, now coded with common parts.  
I also see duplicated procedures at [EDDF](https://navigraph.com/airport/EDDF/Frankfurt-Main) (where I do have the premium deluxe Gaya scenery installed, if this makes a difference). Here the first set of procedures have a correct RNP and the second set have 0 everywhere.  
I have not yet used FS2024 much and I’m unsure if this has been a problem before or if it just appeared with Rev 2. Maybe you have seen this problem before or could check?

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [March 25, 2025, 6:14am UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/12 "2025-03-25T06:14:41Z")

</div>

Hi,  
Yes, thank you. We saw this too yesterday evening, and we will fix it. It’s a wrong test code that splits the procedures into segments. It was my fault, sorry. We will correct this and will upload a new version.

Sorry and thanks for your hint  
Richard

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [March 26, 2025, 8:04pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/13 "2025-03-26T20:04:15Z")

</div>

Hi,  
revision 3 is out and should fix the issue with the double procedures.

Thank you,  
Richard

---

<div class="post-metadata">

**Author:** ![kirkroyster](https://avatars.discourse-cdn.com/v4/letter/k/41988e/32.png) [@kirkroyster](https://forum.navigraph.com/u/kirkroyster)\
**Post date:** [March 27, 2025, 3:19am UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/14 "2025-03-27T03:19:12Z")

</div>

Thanks from my end as well for being so responsive to this issue.  
Kirk

---

<div class="post-metadata">

**Author:** ![falcon71](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@falcon71](https://forum.navigraph.com/u/falcon71)\
**Post date:** [March 27, 2025, 6:05am UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/15 "2025-03-27T06:05:50Z")

</div>

Thank you. I can confirm, the double procedures have been fixed.  
The RNP now looks different again from Rev 2. In Rev 2, I saw that [EDDF](https://navigraph.com/airport/EDDF/Frankfurt-Main) DIXAT 1A (RNP 1) and DEBHI 1A (RNAV 1) both had an RNP of 1NM in the data. In Rev 3, now only DIXAT 1A has an RNP coded and not DEBHI 1A.  
You mentioned, that RNP 1 and RNAV 1 are different requirements and this is technically correct. However, is it actually intended that you only fill the RNP for true RNP procedures? You have taken the response from Working Title and my use case into account? The data in the Navigraph dataset now fills this field differently than the default dataset, which makes things a bit more complicated for addon authors.

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [March 27, 2025, 9:01am UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/16 "2025-03-27T09:01:00Z")

</div>

Hi,  
Please mark where you see an RNP 1 at the DEBHI1A arrival. The DEBHI1A is “only” an RNAV arrival but not, like the DIXAT1A, an RNP arrival; therefore, there are no RNP values in it.

Again, RNAV1 is not the same as RNP1 … RNAV doesn’t automatically mean that this includes RNP. As I have written, it’s a sub from RNAV. That’s precisely why RNP isn’t a `route_type` as RNAV in the ARINC424 rules.

I have checked the AIP Germany, too, and I can’t see any RNP for DEBHI1A. Possible I missed something or I have overseen something.

Cheers  
Richard

---

<div class="post-metadata">

**Author:** ![kirkroyster](https://avatars.discourse-cdn.com/v4/letter/k/41988e/32.png) [@kirkroyster](https://forum.navigraph.com/u/kirkroyster)\
**Post date:** [March 28, 2025, 5:40am UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/17 "2025-03-28T05:40:00Z")

</div>

Likewise, I too can confirm that the double approach issue is resolved.

---

<div class="post-metadata">

**Author:** ![falcon71](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@falcon71](https://forum.navigraph.com/u/falcon71)\
**Post date:** [March 28, 2025, 4:24pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/18 "2025-03-28T16:24:47Z")

</div>

Thank you. I hope I made it clear, that I understand that RNP 1 and RNAV 1 are not the same and that the field was intended to be used differently by the sim and thus is filled und used differently in the default dataset vs the Navigraph dataset.  
Anyway, I guess this is a design decision by Navigraph and works as intended. I consider this matter closed then. Thank you for all your help!

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/1X/4cc83e90d70ab312b1bd2d7527bddad309607265.png) [@system](https://forum.navigraph.com/u/system)\
**Post date:** [March 30, 2025, 4:25pm UTC](https://forum.navigraph.com/t/no-rnp-in-fs2024/19042/19 "2025-03-30T16:25:03Z")

</div>

Closed on March 30, 2025, 4:25pm UTC

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.
