# Installation of new cycle into Pilot 2 ATC?

**URL:** <https://forum.navigraph.com/t/installation-of-new-cycle-into-pilot-2-atc/4517>\
**Category:** General non MSFS data\
**Tags:** airac, howto\
**Created:** [March 10, 2021, 10:45pm UTC](https://forum.navigraph.com/t/installation-of-new-cycle-into-pilot-2-atc/4517 "2021-03-10T22:45:30Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![donsnav777](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/donsnav777/32/1056_2.png) [@donsnav777](https://forum.navigraph.com/u/donsnav777)\
**Post date:** [March 10, 2021, 10:45pm UTC](https://forum.navigraph.com/t/installation-of-new-cycle-into-pilot-2-atc/4517/1 "2021-03-10T22:45:30Z")

</div>

how does P2ATC get updated to the ‘latest’ cycle? I just purchased and its stuck on the 120? cycle and not current

---

<div class="post-metadata">

**Author:** ![Dicko68](https://avatars.discourse-cdn.com/v4/letter/d/df788c/32.png) [@Dicko68](https://forum.navigraph.com/u/Dicko68)\
**Post date:** [March 10, 2021, 10:49pm UTC](https://forum.navigraph.com/t/installation-of-new-cycle-into-pilot-2-atc/4517/2 "2021-03-10T22:49:25Z")

</div>

Hi There. Have you got the FMS Data Manager?

If so, scan and it will find P2ATC nad then prompt you to update it

Steve

---

<div class="post-metadata">

**Author:** ![donsnav777](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/donsnav777/32/1056_2.png) [@donsnav777](https://forum.navigraph.com/u/donsnav777)\
**Post date:** [March 11, 2021, 12:05am UTC](https://forum.navigraph.com/t/installation-of-new-cycle-into-pilot-2-atc/4517/3 "2021-03-11T00:05:35Z")

</div>

yes, I have it in the loader window and select it to ‘update’ P2ATC however P2ATC doesn’t recognize the current cycle still?.. it’s stuck on the ‘trial’ cycle ‘1801’

---

<div class="post-metadata">

**Author:** ![donsnav777](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/donsnav777/32/1056_2.png) [@donsnav777](https://forum.navigraph.com/u/donsnav777)\
**Post date:** [March 11, 2021, 12:27am UTC](https://forum.navigraph.com/t/installation-of-new-cycle-into-pilot-2-atc/4517/4 "2021-03-11T00:27:30Z")

</div>

solution was the finder said automatic then ‘hid’… I had to catch it on scan and ‘check’ its box and it stayed on the ‘list’ I then ran the updater and it worked. The problem may have had to do with the default folder and where I have the program…

---

<div class="post-metadata">

**Author:** ![donsnav777](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/donsnav777/32/1056_2.png) [@donsnav777](https://forum.navigraph.com/u/donsnav777)\
**Post date:** [March 11, 2021, 7:08am UTC](https://forum.navigraph.com/t/installation-of-new-cycle-into-pilot-2-atc/4517/5 "2021-03-11T07:08:33Z")

</div>

everything is working now THX

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/1X/4cc83e90d70ab312b1bd2d7527bddad309607265.png) [@system](https://forum.navigraph.com/u/system)\
**Post date:** [March 16, 2021, 7:09am UTC](https://forum.navigraph.com/t/installation-of-new-cycle-into-pilot-2-atc/4517/6 "2021-03-16T07:09:03Z")

</div>

This topic was automatically closed 5 days after the last reply. New replies are no longer allowed.