# FS2020: DME available at all ILS/LOCs

**URL:** <https://forum.navigraph.com/t/fs2020-dme-available-at-all-ils-locs/23113>\
**Category:** ILS\
**Created:** [April 2, 2026, 6:13pm UTC](https://forum.navigraph.com/t/fs2020-dme-available-at-all-ils-locs/23113 "2026-04-02T18:13:08Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![falcon71](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@falcon71](https://forum.navigraph.com/u/falcon71)\
**Post date:** [April 2, 2026, 6:13pm UTC](https://forum.navigraph.com/t/fs2020-dme-available-at-all-ils-locs/23113/1 "2026-04-02T18:13:09Z")

</div>

Hello,

Today I flew the ILS 26R approach at EDDP:

 ![eddp_dme](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/8/4/84527a88274405285e9a2d42d96b56a04e9dfb12.jpeg)

As you can see, I received a DME, even though this ILS should not have a DME. I recently observed the same issue at LICR LOC A 33 (REG) with the Leonardo Maddog. I know this used to work before, because I fly to EDDP often and I always had to tune in the LND DME. Since I saw this in the PMDG 777 and the Maddog, I assume this is a problem with Navigraph and not with those addons. I’m using FS2020 and Airac 2603 Rev 3.

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [April 2, 2026, 6:31pm UTC](https://forum.navigraph.com/t/fs2020-dme-available-at-all-ils-locs/23113/2 "2026-04-02T18:31:05Z")

</div>

Hi,  
Sorry, but that is not correct … the ILS26R has a DME, ILS26L has no DME.

ILS26R (with DME):

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/9/b/9b4179b1677d72ba0a12ba2a5959f6d805445330.jpeg)

ILS26L (no DME):

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/1/a/1aea8e8713ec94e05283c8f48cd588acf1c5acda.jpeg)

Here, from the AIP Germany:

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/1/8/1814fd15fa8303fe975542936c6f949d2630d7fd.png)

Cheers,  
Richard

---

<div class="post-metadata">

**Author:** ![falcon71](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@falcon71](https://forum.navigraph.com/u/falcon71)\
**Post date:** [April 2, 2026, 7:48pm UTC](https://forum.navigraph.com/t/fs2020-dme-available-at-all-ils-locs/23113/3 "2026-04-02T19:48:42Z")

</div>

That’s interesting, I only looked at the charts, which does not show a DME. The Jeppesen charts are still dated Nov 24 and the German AIP are from Dec 24. This must have been a recent change not yet depicted on the charts. Thank you!

---

<div class="post-metadata">

**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\
**Post date:** [April 2, 2026, 8:00pm UTC](https://forum.navigraph.com/t/fs2020-dme-available-at-all-ils-locs/23113/4 "2026-04-02T20:00:33Z")

</div>

Hi again,  
You can see in the AIP screenshot the black bars on the left side, which indicate that this was recently changed. So, I assume this is a change as well. The data is updated “faster” than the charts; therefore, I expect the changes to appear in the next 1-2 cycles.

Thank you,  
Richard

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/1X/4cc83e90d70ab312b1bd2d7527bddad309607265.png) [@system](https://forum.navigraph.com/u/system)\
**Post date:** [April 4, 2026, 8:00pm UTC](https://forum.navigraph.com/t/fs2020-dme-available-at-all-ils-locs/23113/5 "2026-04-04T20:00:57Z")

</div>

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.