# EBCI ILS 24 wrong DME **URL:** \ **Category:** ILS\ **Created:** [September 11, 2024, 1:26pm UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907 "2024-09-11T13:26:53Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Driver170](https://avatars.discourse-cdn.com/v4/letter/d/ed655f/32.png) [@Driver170](https://forum.navigraph.com/u/Driver170)\ **Post date:** [September 11, 2024, 1:26pm UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/1 "2024-09-11T13:26:53Z")
Hi, I just got EBCI from RFScenery but at the threshold for ILS 24 it reads 1.6 The producer says this is correct but on the chart it reads 0 at threshold. Can someone explain what is going on? ---
**Author:** ![srcooke](https://avatars.discourse-cdn.com/v4/letter/s/9d8465/32.png) [@srcooke](https://forum.navigraph.com/u/srcooke)\ **Post date:** [September 11, 2024, 1:40pm UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/2 "2024-09-11T13:40:11Z")
Same readout without the addon scenery ? regards Stephen ---
**Author:** ![Driver170](https://avatars.discourse-cdn.com/v4/letter/d/ed655f/32.png) [@Driver170](https://forum.navigraph.com/u/Driver170)\ **Post date:** [September 11, 2024, 1:59pm UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/3 "2024-09-11T13:59:03Z")
Hey, I found this ![IMG_7894](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/c/7/c7b67a28d603ddfef7db15ea5ae0941bbdaa2ab8.jpeg) I will disable the scenery and check ---
**Author:** ![srcooke](https://avatars.discourse-cdn.com/v4/letter/s/9d8465/32.png) [@srcooke](https://forum.navigraph.com/u/srcooke)\ **Post date:** [September 11, 2024, 2:41pm UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/4 "2024-09-11T14:41:27Z")
Using default scenery with NG 2409 the DME is zero at threshold of rwy 24 ---
**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\ **Post date:** [September 11, 2024, 2:45pm UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/5 "2024-09-11T14:45:09Z")
> [@srcooke](#): > > Using default scenery with NG 2409 the DME is zero at threshold of rwy 24 Confirm, this observation - have also zero at the THR - thanks Stephen 😉 Cheers, Richard ---
**Author:** ![srcooke](https://avatars.discourse-cdn.com/v4/letter/s/9d8465/32.png) [@srcooke](https://forum.navigraph.com/u/srcooke)\ **Post date:** [September 11, 2024, 2:49pm UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/6 "2024-09-11T14:49:12Z")
Should there be any doubt by the scenery developer, DME is co-located with glidepath: ![capture_001_11092024_154805](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/3/9/39ec35ad41a4fa79e015ddc0254b48a0f5ab1ca6.jpeg) ---
**Author:** ![Driver170](https://avatars.discourse-cdn.com/v4/letter/d/ed655f/32.png) [@Driver170](https://forum.navigraph.com/u/Driver170)\ **Post date:** [September 11, 2024, 3:02pm UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/7 "2024-09-11T15:02:11Z")
Thanks for checking guys. I believe this scenery developer is just using the MSFS standard location ---
**Author:** ![Driver170](https://avatars.discourse-cdn.com/v4/letter/d/ed655f/32.png) [@Driver170](https://forum.navigraph.com/u/Driver170)\ **Post date:** [September 11, 2024, 9:49pm UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/8 "2024-09-11T21:49:35Z")
So if the default navdata gets replaced by navigraph why isn’t the EBCI scenery not using navigraph data because that is using the stock data from MSFS? ---
**Author:** ![NAVData](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/navdata/32/30549_2.png) [@NAVData](https://forum.navigraph.com/u/NAVData)\ **Post date:** [September 12, 2024, 3:27am UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/10 "2024-09-12T03:27:09Z")
I don’t know the 3rd party scenery nor do we have any contact to the designer, therefore only an assumption. It could be that the antennas are also set in the scenery. Further the loading order of the packages are wrong and last, the scenery designer doesn’t allow to overrule his airport facilities from any another package. Again, this can be the reason but I don’t know what is the real cause here. I don’t have the scenery for testing. Cheers Richard ---
**Author:** ![system](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/1X/4cc83e90d70ab312b1bd2d7527bddad309607265.png) [@system](https://forum.navigraph.com/u/system)\ **Post date:** [September 14, 2024, 3:27am UTC](https://forum.navigraph.com/t/ebci-ils-24-wrong-dme/16907/11 "2024-09-14T03:27:15Z")
Closed on September 14, 2024, 3:27am UTC This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.