# Confusion about VFR VP idents

**URL:** <https://forum.navigraph.com/t/confusion-about-vfr-vp-idents/24381>\
**Category:** General\
**Created:** [September 28, 2026, 7:18pm UTC](https://forum.navigraph.com/t/confusion-about-vfr-vp-idents/24381 "2026-09-28T19:18:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![HawkerHurricane](https://avatars.discourse-cdn.com/v4/letter/h/977dab/32.png) [@HawkerHurricane](https://forum.navigraph.com/u/HawkerHurricane)\
**Post date:** [September 28, 2026, 7:18pm UTC](https://forum.navigraph.com/t/confusion-about-vfr-vp-idents/24381/1 "2026-09-28T19:18:22Z")

</div>

Hello!

I have a little confusion here, not sure if I’m missing something, or there are other problems…

I wanted to set up a flight with VFR points in the SWS Kodiak for example, but of course, it’s system only accept VP idents…  
My problem/confusion is, that in EU, most of the points only have their VFR name on my Charts…here an example…

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/3/6/3677bbdd643bc016b1815ffb88d0facb403da14f.jpeg)

…if I click on it, I only get some basic data about it…

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/1/2/12bc655d709ea57c4d00aa15395570a179b24db6.png)

…but if I use the search function for the same point, I find the VP ident too…

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/3X/b/1/b1de6f9eb8f9e319151ca3b9d27478667412366a.png)

My question is, shouldn’t all VP ident be on the VFR chart, above the waypoints’ name, or is ther any easier way to find the ident codes, and I just missed it?

(Sorry if there was a similar topic, but I did not find anything similar)