# CJ4 - Airways Not Found

**URL:** <https://forum.navigraph.com/t/cj4-airways-not-found/11715>\
**Category:** General MSFS Data\
**Created:** [April 3, 2023, 9:52pm UTC](https://forum.navigraph.com/t/cj4-airways-not-found/11715 "2023-04-03T21:52:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wheelman1](https://avatars.discourse-cdn.com/v4/letter/w/2bfe46/32.png) [@Wheelman1](https://forum.navigraph.com/u/Wheelman1)\
**Post date:** [April 3, 2023, 9:52pm UTC](https://forum.navigraph.com/t/cj4-airways-not-found/11715/1 "2023-04-03T21:52:52Z")

</div>

Flying the CJ4 AAU1 and using Simbrief to create a flight plan to manually input into the FMS.  
Have latest AIRAC Cycle, Navdata Centre/Simlink (reinstalled all Nav apps and cycles just to be sure)

When I go to FPLN and input a high altitude airway (ie “J92”) into “VIA” I now get an error saying “Airway Not Found”. In the CJ4 you’d typically select your Airway, then an end waypoint under “TO”.

I’ve checked with other high altitude airways, all are not found.  
Am I doing something wrong or is this an issue with my Navdata, or the CJ4?

I swear yesterday I flew the exact same route, no issues.  
Victor airways appear OK…

 ![20230403_141708](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/6/6f7e35700a62b6a9b1109f90694e50a908ca0842.jpeg)

 ![20230403_141725](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/e/e68f971abe668af02e6c3090250580610aaa824e.jpeg)  
 ![Simbrief](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/2X/f/ff3f1469d8c6593297563d26ab6bc4e3b2accc33.jpeg)

---

<div class="post-metadata">

**Author:** ![Wheelman1](https://avatars.discourse-cdn.com/v4/letter/w/2bfe46/32.png) [@Wheelman1](https://forum.navigraph.com/u/Wheelman1)\
**Post date:** [April 5, 2023, 1:18am UTC](https://forum.navigraph.com/t/cj4-airways-not-found/11715/2 "2023-04-05T01:18:59Z")

</div>

Looks like I’ve figured it out. Not sure if it’s down to process flow in the FMS or a bug (probably not a bug).

You can’t seem to have an arrival/approach in place before adding airways.

All good when I load my origin/destination then departure/transition THEN airways/waypoints then arrival/approach

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/flex013/uploads/navigraph1/original/1X/4cc83e90d70ab312b1bd2d7527bddad309607265.png) [@system](https://forum.navigraph.com/u/system)\
**Post date:** [April 12, 2023, 1:19am UTC](https://forum.navigraph.com/t/cj4-airways-not-found/11715/3 "2023-04-12T01:19:47Z")

</div>

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.