# API for ATC Remarks

**URL:** <https://forum.navigraph.com/t/api-for-atc-remarks/12596>\
**Category:** Dispatch\
**Created:** [June 23, 2023, 5:38pm UTC](https://forum.navigraph.com/t/api-for-atc-remarks/12596 "2023-06-23T17:38:56Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![fcooper94](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/fcooper94/32/12430_2.png) [@fcooper94](https://forum.navigraph.com/u/fcooper94)\
**Post date:** [June 23, 2023, 5:38pm UTC](https://forum.navigraph.com/t/api-for-atc-remarks/12596/1 "2023-06-23T17:38:56Z")

</div>

Hello,

Is is possible to send in the URL a specific ATC Remark?

> **[SimBrief - Dispatch](https://dispatch.simbrief.com/options/custom?orig=LFQQ&dest=EGFF&deph=04&depm=50&steh=01&stem=20&route=TRACA%20B3%20RINTI%20L10%20ITVIP%20DCT%20BIG%20T421%20ICTAM&manualrmk=World%20Flight%20Validated%20Route%20from%20www.worldflight.center)**
>
> Generate virtual flight plans in seconds

&manualrm

This will only send it as a Dispatcher remark, not as an ATC remark.

Any help would be great,

Fraser

---

<div class="post-metadata">

**Author:** ![SimBrief](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/simbrief/32/4850_2.png) [@SimBrief](https://forum.navigraph.com/u/SimBrief)\
**Post date:** [June 25, 2023, 2:18pm UTC](https://forum.navigraph.com/t/api-for-atc-remarks/12596/2 "2023-06-25T14:18:16Z")

</div>

Hi Fraser,

This can be done using the `acdata` parameter, explained here: [The SimBrief API - Note regarding Aircraft Data](https://forum.navigraph.com/t/the-simbrief-api/5298#note-regarding-aircraft-data-7).

Basically, you could send the following parameter: `&acdata={"extrarmk":"DAT\/V RVR\/250 RMK\/EXAMPLE"}`.

Best regards,

---

<div class="post-metadata">

**Author:** ![SimBrief](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/simbrief/32/4850_2.png) [@SimBrief](https://forum.navigraph.com/u/SimBrief)\
**Post date:** [June 25, 2023, 2:23pm UTC](https://forum.navigraph.com/t/api-for-atc-remarks/12596/3 "2023-06-25T14:23:01Z")

</div>

Actually, I just noticed that this won’t work if you aren’t specifying an aircraft type in your URL. Whenever a user changes or selects an aircraft type, this will clear any `acdata` options (it needs to be cleared since `acdata` can also be used to specify things such as MTOW, Equipment, etc.)

Unfortunately I don’t think there is a way to do this at the moment if you aren’t sending an aircraft in the initial URL.

Best regards,

---

<div class="post-metadata">

**Author:** ![fcooper94](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.navigraph.com/fcooper94/32/12430_2.png) [@fcooper94](https://forum.navigraph.com/u/fcooper94)\
**Post date:** [July 4, 2023, 4:41pm UTC](https://forum.navigraph.com/t/api-for-atc-remarks/12596/4 "2023-07-04T16:41:45Z")

</div>

OK, no problem.

Thanks for the reply.

We send a route only really 🙂
